rowenta steam iron repair manual

Rowenta Steam Iron Repair Manual ✓ https://blltly.com/1twxf1

A red flashing light indicates that the auto-off has been activated To switch the iron on again, move the iron or gently shake it.. Steam escaping from old cap It was a quick Loading DescriptionASpray nozzleBWater filling inletCVariable steam control with Self clean (Depending on model)DSpray buttonEBurst of steam buttonFAuto off indicator light(Depending on model)GTemperature control dialHFlexible cord protectorI Power cordJPilot lightKStainless steel soleplateLTransparent water tank3-way Auto-offAuto off is not an on/off switch.. 3 The iron should always be turned to Min before plugging or unplugging from outlet.

rowenta steam iron repair manual

Vertical steaming9(Depending on model ) Check packaging This is especially useful for getting wrinkles out of hanging clothes, curtains etc.. Never yank cord to disconnect from outlet, instead grasp plug and pull to disconnect.. Unplug the iron when it is not in use 1(Depending on model ) If the iron is not moved while it is plugged in,an internal safety switch will turn it off.. Warning! Never iron clothes on the body or point your iron at anybody when steaming!IMPORTANT SAFETY INSTRUCTIONSWhen using your iron, basic safety precautions should always be followed, including the following:Read all instructions before using the iron.. With water in the tank, the burst of steam button can be used as soon as the steam ironing temperature has been reached (● ● ●).

rowenta steam iron repair manual

rowenta steam iron repair manual

6 Do not operate iron with a damaged cord or if the iron has been dropped or damaged.. Leave an interval of at least four seconds between pressing the burst of steam button.. Find genuine replacement parts along with great repair advice and 365 day returns.. ' mark on the water tank Plug the iron into the outlet electronicBurst of steam8To remove stubborn wrinkles or press in a sharp crease, usethe burst of steam button.. Press the button firmly, a strong burst of steam penetrates deep into the fabric.

Holding the iron vertical, pour water into the water filling inlet, up to the 'max.. icelectronFilling with water2Slowly remove the protective label/cover from the soleplate.. It will turn off in 8 minutes if left vertically or in 30 seconds if left on its soleplate or tipped over.. 1 Use iron only for its intended use 2 To protect against a risk of electric shock, do not immerse the iron in water or other liquids.

Loop cord loosely around handle when storing 5 Always disconnect iron from electrical outlet when filling iron with water or emptying and when not in use.. 4 Do not allow cord to touch hot surfaces Let iron cool completely before putting away.. This is an authentic OEM replacement part for select models of Rowenta Irons To see if this is. 5ebbf469cd

5ebbf469cd

Rowenta Steam Iron Repair Manual chancsauve